Polyferric sulfate(PFS) polymer is a derivative of polymer in the sewage treatment agent industry. The polymer also includes polyaluminum chloride, polyaluminum ferric silicate, polyacrylamide and so on. In the field of water purification in my country, there are not a few polymerized ferric sulfate used. This new environmentally friendly product has a great effect on the treatment of sewage from all walks of life!
Polyferric iron salt inorganic macromolecule flocculant can quickly neutralize the negative charge on the surface of colloidal particles in water, and can also create a flocculation effect by bridging or adsorbing between ions. The flocs produced have large specific gravity and fast settling speed, showing excellent coagulation effect and higher purification capacity compared with other inorganic flocculants. Polyferric sulfate is widely used in drinking water, various industrial water, industrial wastewater, Treatment of urban sewage.
Polymeric ferric sulfate has stable performance, excellent water purification effect, and does not contain harmful substances such as heavy metal ions. The removal rate is as high as 90% or more; the purification effect of low temperature, low turbidity and high turbidity raw water is very good.
The polyferric sulfate polymer is hydrolyzed and suspended in the wastewater by iron ions in the wastewater. The colloidal particles of organic pollutants are electrically neutralized and adsorbed and bridged, and the harmful ions and pollutants in the wastewater are complexed, destabilized and aggregated to precipitate. In the process of sediment formation in wastewater, the colloidal adsorbents in the wastewater are captured by nets to form flocculation aggregates, coagulated and precipitated into mud, and then separated to achieve correct removal.
The action of polyferric sulfate can remove most of them, and the removal rate is close to 90%. If the remaining part of the solubility is not completely removed, it can be completely removed by biochemical process, or a biochemical micro-aeration system is added above the sedimentation tank, treated with biochemical water purifier, and can also be removed by microorganisms. Anaerobic + aerobic treatment can be used.
1. Under suitable conditions, the polymer ferric sulfate destabilizes the colloidal particle pollutants in the wastewater - coagulation - bridging and adsorption, and the formed giant particle aggregates generate positive and negative ions. Strong attraction, and the flocculation effect increases with the increase of the dosage of polyferric sulfate.
2. When the dosage of polyferric sulfate is 10-40/, the removal rate of the flocculation effect increases rapidly, but when it exceeds this amount, the wastewater will be milky white, the flocs will also become smaller, the sludge will float and flocculate. The effect is not complete enough, resulting in a decrease in the removal rate, so the dosage should be strictly controlled.
3. The precipitation of harmful ions and inorganic and organic pollutants in the flocculation wastewater of polyferric sulfate into mud on the surface will not reduce it, because the removal of organic pollutants in the wastewater will inevitably reduce the demand for chemical oxygen consumption , because the oxidizable substances in the water are gone, they are naturally removed.
4. The applicable range of the value of polymerized ferric sulfate is 4-11. When the range is 5-9, the removal rate of Chimelong polymerized ferric sulfate is 85%.
Thank you for your attentionHenan aierfuke Chemical Co., Ltd:Focus on water treatment, only for the healthy world! Our company is committed toPolyaluminium chloride、Polyferric sulfateThe R & D, manufacturing and sales of series of water purification materials are willing to create success with our customers and friends.